Polishing

Mineshima H-2 - Half round metal file for plastic

Small, metal flat file for working with plastic parts. Very good for quick cleaning of parts and smoothing areas where they were cut off the sprue. Attention! Use only for plastic parts! File is not suitable for use on other material! File length: 130mm

Availability: 1 pc

Dispatched within: 24 hours

Price:

12,90 zł

pcs

Mineshima I-10 - Metal file - half round

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 8,2mm, at tip 3mm, thickness: 2,8mm

Availability: out of stock

Price:

56,90 zł

Mineshima I-11 - Precise, fine metal file - flat

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width: 2,5mm, thickness: 1,1mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

55,90 zł

pcs

Mineshima I-12 - Precise, fine metal file - round

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, diameter: 2mm, at tip 0,7mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

55,90 zł

pcs

Mineshima I-13 - Precise, fine metal file - square, tapered

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width: 2mm, at tip 1,0mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

57,90 zł

pcs

Mineshima I-14 - Precise, fine metal file - triangular

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width 2,7mm, at tip 1,1mm.

Availability: 1 pc

Dispatched within: 24 hours

Price:

61,90 zł

pcs

Mineshima I-15 - Precise, fine metal file - half round

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width: 3,1mm, at tip 1,1mm, thickness 1,5mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

57,90 zł

pcs

Mineshima I-35 - Precise, fine metal file - flat

#ADR!

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima I-36 - Precise, fine metal file - round

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 5,4mm, thickness: 1,3mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima I-37 - Precise, fine metal file - square, tapered

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 2,4mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima I-38 - Precise, fine metal file - half round

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 5,3mm, at tip 1mm, thickness: 1,6mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima I-38 - Precise, fine metal file - triangular

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 3,5mm

Availability: out of stock

Price:

7,90 zł

Mineshima I-6 - Metal file - flat

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 6,8mm, thickness: 2,7mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

49,90 zł

pcs

Mineshima I-7 - Metal file - round

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, diameter 3,25mm, at tip 1,5mm

Availability: 1 pc

Dispatched within: 24 hours

Price:

49,90 zł

pcs

Mineshima I-8 - Metal file - square tapered

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 3,2mm, at tip 1,7mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

49,90 zł

pcs

Mineshima I-9 - Metal file - triangular

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 6,2mm, at tip: 3,4mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

55,90 zł

pcs

Mirage 100035 - Sanding stick 240/320

Double sided sanding stick for basic shaping, grit: 240/320

Availability: out of stock

Price:

5,90 zł

Mirage 100036 - Sanding stick 180/240

Double sided sanding stick for basic shaping, grit: 180/240

Availability: available at wholesaler

Dispatched within: 1-2 days

Price:

5,90 zł

pcs

Vendor

Dispatched within

Price

New

On sale

Sign up for our latest news and special offers

Mineshima H-2 - Half round metal file for plastic

Mineshima I-10 - Metal file - half round

Mineshima I-11 - Precise, fine metal file - flat

Mineshima I-12 - Precise, fine metal file - round

Mineshima I-13 - Precise, fine metal file - square, tapered

Mineshima I-14 - Precise, fine metal file - triangular

Mineshima I-15 - Precise, fine metal file - half round

Mineshima I-35 - Precise, fine metal file - flat

Mineshima I-36 - Precise, fine metal file - round

Mineshima I-37 - Precise, fine metal file - square, tapered

Mineshima I-38 - Precise, fine metal file - half round

Mineshima I-38 - Precise, fine metal file - triangular

Mineshima I-6 - Metal file - flat

Mineshima I-7 - Metal file - round

Mineshima I-8 - Metal file - square tapered

Mineshima I-9 - Metal file - triangular

Mirage 100035 - Sanding stick 240/320

Mirage 100036 - Sanding stick 180/240