Hobbyzone workshop system - Exito Model Store

Hobbyzone PSM2 Small shipbuilding jig

Small Building Slip allows precise and efficient model hull construction. Adjustable brackets prevent dreadful asymmetrical bulkhead positioning. It is possible to mount the model upside down with special brackets (included) for convenient hull planking. The model and accessories in the pictures are not included in the kit and serve only demonstration purposes. Main features: - Base size: 60cm x 20cm (23.6" x 7.9") - Maximum keel length: 60 - 80cm (23.6" - 31.5") -up to 60cm (23.6") works best - Maximum keel thickness: 5mm (0.2") - Upside down model mounting for convenient hull planking.

Small Building jig is delivered in kit form and has to be bonded with wood glue (not included). It contains perfectly fitted parts and assembly instructions. Smaller parts may be machined with interconnecting stubs which must be removed before assembly, just like plastic model parts from a sprue tree.

.

Availability: out of stock

Price:

€28.33

Hobbyzone PSM1 Professional shipbuilding jig

A truly professional tool for building ship and boat models with a keel length up to 100cm (39.4"). Fully equipped with many adjustable brackets and holders. Not only does Professional Building Slip allow for more precise model hull construction, but also makes it more efficient. Full length rulers and adjustable bulkhead brackets provide minute adjustments and prevent dreadful asymmetrical bulkhead positioning. Professional Building Slip also features full 360 degrees hull rotation thus enabling comfortable and accurate construction work. Professional Building Slip is delivered in kit form and has to be bonded with wood glue (not included). It contains perfectly fitted parts and assembly instructions. The model and accessories in the pictures are not included in the kit and serve only demonstration purposes. Main features: - Base size: 100cm x 25cm (39.4" x 9.8") - Maximum keel length: 100cm (39.4") - Maximum keel thickness: 7mm (0.3") - 360 degrees hull rotation for comfortable and accurate modelling - Full length rulers and adjustable bracket mounting points.

Availability: out of stock

Price:

€74.50

Hobbyzone GDL1 Plank bending tool

Electric tool for bending slats, planks etc. Very useful while building wooden models of ships. Can also be useful in any type of model making that involves wooden planks. Working principle is very simple: just wet the slat to be bent in a warm water and place it on a bending jig. The bending iron get hot when switched on and by evaporating water on the slat - it keeps its bended shape. Profiling jig has two half-circle shapes, so there is a possibility to form a U shape out of the bended slat. Operating voltage: 220-240 V Set includes a wooden storage case which lid doubles as a holder for the hot iron.

Availability: out of stock

Price:

€25.95

Hobbyzone OM14D Modular organizer - Universal drawer for OM14 module

Large drawer with adjustable dividers. Designed to use either as a standalone container or an insert for the OM14 module. Dividers alow for customization of the storage area. Comes unassembled - PVA (wood) glue required for assembly. Assembly instructions included. This drawer has no magnets. Pictured accessories not included. Dimensions: 28,7 cm x 13,7 cm x 13,7 cm

Availability: out of stock

Price:

€11.88

Hobbyzone AJ01 Large aircraft model assembly jig

AJ01 large aircraft assembly jig is a fully adjustable stand giving a secure and steady support for the fuselage and wings of a model kit. Especially useful in ensuring proper geometry of the wings and ailerons, painting and finishing.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€44.74

pcs

Hobbyzone MA01 Model assembly jig

MA01 assembly jig is a multipurpose tool, very helpful in the process of building, painting and transporting your model kit.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€24.74

pcs

Hobbyzone PW Waterline marking tool

Thanks to this handy tool it's easy to trace a consistent straight line on a chosen height. Just set the desired height on the tool and move it along the hull or any other object you want to trace the line along.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€6.40

pcs

Hobbyzone OM02U Modular Desktop Organizer - Module with tilting drawers x 3

All-round module with 3 tilting drawers suitable for storing most available on the market model paints (up to 43mm jak diameter) and also Tamiya square glue and panel line accent jars. You can store up to 63 Vallejo bottles of Vallejo/Army Painter 17 ml paints or 63 10 ml Tamiya acrylic paints.

Availability: out of stock

Price:

€24.74

HOBBYZONE WP1 Wet palette

Wet Palette is one of the basic tools for people painting with acrylic paints. Mixtures of colors can be used even for several days, and paints maintain perfect consistency. Slow absorption of water from the sponge ensures long-term performance and optimum moisture of paints. Wet Palette significantly improves work comfort, and promotes vast advances of painting skills. Directions for use: - Generously moisten the sponge with water and place a sheet of palette paper on it so that it adheres well. The pallete is ready for use. After work, cover pallete with lid to prevent contents from drying out. Thoroughly clean palette and sponge once a month. Replace palette paper regularly. Set contains: 1 x Palette, 2 x Sponge, 50 x Paper, 1 x Brush stand. Dimensions: 202mm (7.95") x 147mm (5.79") x 22mm (0.87")

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€17.60

pcs

HOBBYZONE WP1K Refill set for wet palette

Refill set for wet palette. 2x sponge, 50x palette paper.

Availability: out of stock

Price:

€8.33

HOBBYZONE OM08B Corner module for hanging paper towel

Corner module for hanging paper towel. Max height 28,7 cm. Changes module set direction by 90 degrees. Modules are connected together by included magnets. Thanks to this you an instantly change the workspace configuration to best suits your needs. Set contains easy to assemble, pre cut wooden parts, clear pictorial assembly instructions and strong neodymium magnets. White/wood glue required for assembly, not included. Accessories pictured for illustration purposes only and are not included.

Availability: out of stock

Price:

€11.88

HOBBYZONE S2XB Large paints stand - 41mm

Paint Stand - 41mm is a paint jar/bottle storage stand with 60 round slots of a 41mm diameter. It neatly holds Tamiya 23ml paint jars and similar. It contains perfectly fitted parts and its assembly takes just a few moments. Rearrangement with shelves from other stands is not possible!

Availability: out of stock

Price:

€14.26

HOBBYZONE S1XB Paints stand - 41mm

Paint Stand - 41mm is a paint jar/bottle storage stand with 28 round slots of a 41mm diameter. It neatly holds Tamiya 23ml paint jars and similar. It contains perfectly fitted parts and its assembly takes just a few moments. Rearrangement with shelves from other stands is not possible!

Availability: out of stock

Price:

€8.55

HOBBYZONE OM16 Magnetic Instruction Holder

OM16 Magnetic Instruction Holder slides over the top of OM07a, OM13, OM15 and all OM05 paint modules. It provides comfortable and convenient work area by holding instructions or reference materials off your working surface. The white board is not magnetic. There are two magnetic inserts near each top corner that are magnetic and where you see the magnets placed in the photo. Use several OM16 magnetic backboards side-by-side to hold larger instruction sheets and keep your work surfaces clear of papers. The module is delivered in kit form and has to be bonded with wood glue (not included). It contains perfectly fitted parts, magnets and assembly instructions. Dimensions: 30cm x 15cm (11.8"x 5.9"). Installed module adds 13.5cm/5.3" to the height of the setup.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€7.36

pcs

HOBBYZONE SDM1S Paint station

Paint station for painting model kits, figures etc. Station consist of 40x30x6cm base plate with two rows for paint bottles and additional holes for brushes, files etc, two places for water cups. Product SDM1 ver S (SMALL - 26mm) fits to ant model paints with bottles of given diameter, similar to Vallejo 17ml bottles.

Availability: out of stock

Price:

€16.64

HOBBYZONE SDM2S Large paint station

Large paint station for painting model kits, figures etc. Station consist of 55x35x6cm base plate with two rows for paint bottles and additional holes for brushes, files etc, two places for water cups. It also has two "wings" that can act as a small shelves e.g. for currently painted parts. Product SDM2 ver S (SMALL - 26mm) fits to ant model paints with bottles of given diameter, similar to Vallejo 17ml bottles.

Availability: out of stock

Price:

€23.79

HOBBYZONE SDM3S Professional paint station.

Professional, three row paint station for painting model kits, figures etc. Station consist of 60x40x8cm base plate with three rows for paint bottles and additional holes for brushes, files etc, two places for water cups. Product SDM3 ver S (SMALL - 26mm) fits to ant model paints with bottles of given diameter, similar to Vallejo 17ml bottles.

Availability: out of stock

Price:

€30.93

HOBBYZONE AC1 Airbrush Painting Clips Holder

Holder with clips for fixing parts while using an airbrush.

Availability: out of stock

Price:

€17.36

Sign up for our latest news and special offers

Hobbyzone