Polishing

Mineshima I-36 - Precise, fine metal file - round

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 5,4mm, thickness: 1,3mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima I-37 - Precise, fine metal file - square, tapered

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 2,4mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima I-38 - Precise, fine metal file - triangular

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 3,5mm

Availability: out of stock

Price:

7,90 zł

Mineshima I-38 - Precise, fine metal file - half round

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 5,3mm, at tip 1mm, thickness: 1,6mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima H-1 - Flat metal file for plastic

Small, metal flat file for working with plastic parts. Very good for quick cleaning of parts and smoothing areas where they were cut off the sprue. Attention! Use only for plastic parts! File is not suitable for use on other material! File length: 130mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

10,90 zł

pcs

Mineshima H-2 - Half round metal file for plastic

Small, metal flat file for working with plastic parts. Very good for quick cleaning of parts and smoothing areas where they were cut off the sprue. Attention! Use only for plastic parts! File is not suitable for use on other material! File length: 130mm

Availability: 1 pc

Dispatched within: 24 hours

Price:

12,90 zł

pcs

Mineshima I-6 - Metal file - flat

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 6,8mm, thickness: 2,7mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

49,90 zł

pcs

Mineshima I-7 - Metal file - round

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, diameter 3,25mm, at tip 1,5mm

Availability: 1 pc

Dispatched within: 24 hours

Price:

49,90 zł

pcs

Mineshima I-8 - Metal file - square tapered

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 3,2mm, at tip 1,7mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

49,90 zł

pcs

Mineshima I-9 - Metal file - triangular

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 6,2mm, at tip: 3,4mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

55,90 zł

pcs

Mineshima I-15 - Precise, fine metal file - half round

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width: 3,1mm, at tip 1,1mm, thickness 1,5mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

57,90 zł

pcs

Mineshima GY-3 - Ultra precise round file - fine grit

Ultra precise round file for plastic and metal with a diameter of only 0,6mm!m! Perfect for cleaning up those tiny spaces and filigree details of your model kit! Bare handle provides full control over the file while working. 128 notches for each 25mm of file length ensures smooth surface after filing. Total file length: 140mm, working part length: 40mm.

Availability: out of stock

Price:

89,90 zł

Mineshima GY-4 - Ultra precise round file - medium grit

Ultra precise round file for plastic and metal with a diameter of only 0,6mm!m! Perfect for cleaning up those tiny spaces and filigree details of your model kit! Bare handle provides full control over the file while working. 70 notches for each 25mm of file's length ensures quick removal of excess material and shapng of the surface. Total file length: 140mm, working part length: 40mm.

Availability: out of stock

Price:

84,90 zł

Mineshima H-13 - Set of 3 fine files in different shapes.

Set of three metal files in diffeent shapes. Very useful for cleaning up plastic parts of a model kit. Fine grit - perfect for cleaning up small details or final sanding of an element's surface. Set includes flat, half round and round shaped file. File length: 140mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

20,90 zł

pcs

Mineshima H-14 - Set of 5 fine files in different shapes.

Set of five metal files in diffeent shapes. Very useful for cleaning up plastic parts of a model kit. Fine grit - perfect for cleaning up small details or final sanding of an element's surface. Set includes flat, square, triangular, round and half round file. File length: 140mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

28,90 zł

pcs

Mineshima H-16 - Set of 5 medium files in different shapes.

Set of five metal files in diffeent shapes. Very useful for cleaning up plastic parts of a model kit. Medium grit - quickly and efficiently removes more material from sanded part which allows for a precise and fast shaping of part's surface. Set includes flat, square, triangular, round and half round file. File length: 140mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

28,90 zł

pcs

Mineshima I-11 - Precise, fine metal file - flat

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width: 2,5mm, thickness: 1,1mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

55,90 zł

pcs

Mineshima I-12 - Precise, fine metal file - round

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, diameter: 2mm, at tip 0,7mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

55,90 zł

pcs

Vendor

Dispatched within

Price

New

On sale

Sign up for our latest news and special offers

Mineshima I-36 - Precise, fine metal file - round

Mineshima I-37 - Precise, fine metal file - square, tapered

Mineshima I-38 - Precise, fine metal file - triangular

Mineshima I-38 - Precise, fine metal file - half round

Mineshima H-1 - Flat metal file for plastic

Mineshima H-2 - Half round metal file for plastic

Mineshima I-6 - Metal file - flat

Mineshima I-7 - Metal file - round

Mineshima I-8 - Metal file - square tapered

Mineshima I-9 - Metal file - triangular

Mineshima I-15 - Precise, fine metal file - half round

Mineshima GY-3 - Ultra precise round file - fine grit

Mineshima GY-4 - Ultra precise round file - medium grit

Mineshima H-13 - Set of 3 fine files in different shapes.

Mineshima H-14 - Set of 5 fine files in different shapes.

Mineshima H-16 - Set of 5 medium files in different shapes.

Mineshima I-11 - Precise, fine metal file - flat

Mineshima I-12 - Precise, fine metal file - round