Mineshima

Mineshima E-102 - Precision cutters for plastic model parts

The Mineshima E-102 precision side cutters are high-quality modeling pliers designed for cutting plastic model parts from sprues. Their sharp, fine blades allow for clean, accurate cuts without damaging delicate details.

Accurate cutting of plastic parts
High-quality steel blades
Ergonomic non-slip handle

An essential tool for every modeler’s workbench.

Availability: 2 pcs

Dispatched within: 24 hours

Price:

€18.63

Regular price: ~~€21.17~~

Lowest price: €20.69

pcs

Special price

Mineshima F-5 - Tweezers with curved tip

Stainless steel curved tweezers. Precisely machined tips prevents part from slipping away. Total length: 125mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€2.60

pcs

Mineshima GY-2 - Ultra precise flat file - medium grit

Ultra precise flat file for plastic and metal with a thickness of only 0,5mm! Perfect for cleaning up those tiny spaces and filigree details of your model kit! Bare handle provides full control over the file while working. 70 notches for each 25mm of file's length ensures quick removal of excess material and shapng of the surface. Total file length: 140mm, working part length: 40mm, width: 4mm, thickness: 0,5mm.

Availability: out of stock

Price:

€21.40

Mineshima GY-1 - Ultra precise flat file - fine grit

Ultra precise flat file for plastic and metal with a thickness of only 0,5mm! Perfect for cleaning up those tiny spaces and filigree details of your model kit! Bare handle provides full control over the file while working. 128 notches for each 25mm of file length ensures smooth surface after filing. Total file length: 140mm, working part length: 40mm, width: 4mm, thickness: 0,5mm.

Availability: out of stock

Price:

€21.40

Mineshima F-91 - Super precision tweezers - straight tip with claw

Compact super precise tweezers with a sharp, straight tip ending with a small claw, made from stainless steel. Allows for sure gripping of the smallest and thinnest parts. Specially profilled claw at the end of the tip prevents skewering of the tweezers and stabilizes small parts from slipping from it. It can also be helpful in making various riggings on model kits - a threat or monofilament will not slip out of the tweezers' tips. Special holes in the handle give additional grip for fingers. Total length: 90mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

€14.44

Regular price: ~~€16.40~~

Lowest price: €16.40

pcs

Special price

Mineshima I-10 - Metal file - half round

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 8,2mm, at tip 3mm, thickness: 2,8mm

Availability: out of stock

Price:

€13.55

Mineshima I-35 - Precise, fine metal file - flat

#ADR!

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€2.12

pcs

Mineshima I-36 - Precise, fine metal file - round

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 5,4mm, thickness: 1,3mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€2.12

pcs

Mineshima I-37 - Precise, fine metal file - square, tapered

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 2,4mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€2.12

pcs

Mineshima I-38 - Precise, fine metal file - triangular

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 3,5mm

Availability: out of stock

Price:

€1.88

Mineshima I-38 - Precise, fine metal file - half round

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 5,3mm, at tip 1mm, thickness: 1,6mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€2.12

pcs

Mineshima H-1 - Flat metal file for plastic

Small, metal flat file for working with plastic parts. Very good for quick cleaning of parts and smoothing areas where they were cut off the sprue. Attention! Use only for plastic parts! File is not suitable for use on other material! File length: 130mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€2.60

pcs

Mineshima H-2 - Half round metal file for plastic

Small, metal flat file for working with plastic parts. Very good for quick cleaning of parts and smoothing areas where they were cut off the sprue. Attention! Use only for plastic parts! File is not suitable for use on other material! File length: 130mm

Availability: 1 pc

Dispatched within: 24 hours

Price:

€2.70

Regular price: ~~€3.07~~

Lowest price: €2.83

pcs

Special price

Mineshima RN-01 - Nokoru precision nippers for plastic

Precise nippers for plastic with a specially designed blade that leaves a small amount of sprue gate on the part. Remaining stub is small enough to be easily sanded down. This design ensures, that even we put the nipper blades flush with the part there is no risk of accidental damage. Double blade design for cutting plastic parts. Soft spring reduces hand fatigue during longer working periods and nice to touch, anti-slip elastomer handles improves use comfort. Sharp, thin blades allow reaching even smallest parts to cut them out of the sprue.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€8.31

pcs

Mineshima F-90 - Super precision tweezers - straight tip

Compact super precise tweezers with a sharp, straight tip made from stainless steel. Allows for sure gripping of the smallest and thinnest parts and slightly serrated edges improve grip even further. Special holes in the handle give additional grip for fingers. Total length: 90mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€16.64

pcs

Mineshima I-8 - Metal file - square tapered

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 3,2mm, at tip 1,7mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

€10.45

Regular price: ~~€11.88~~

Lowest price: €11.64

pcs

Special price

Mineshima I-9 - Metal file - triangular

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 6,2mm, at tip: 3,4mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

€11.71

Regular price: ~~€13.31~~

Lowest price: €13.07

pcs

Special price

Mineshima I-7 - Metal file - round

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, diameter 3,25mm, at tip 1,5mm

Availability: 1 pc

Dispatched within: 24 hours

Price:

€10.45

Regular price: ~~€11.88~~

Lowest price: €11.64

pcs

Special price

Sign up for our latest news and special offers