Tools

Mr.Hobby MT107 - Mr.Ultra Single Blade Nipper

Highest quality single bladed cutters for removing plastic parts from sprues. Made by Japanese master craftsman. Super precise single bladed nippers for removing even the smallest parts from sprues without risk of damaging them.

High quality single blade cutters for removing model parts from sprue.

Precisely machined thin and narrow blade allows easy reach to even the smallest parts and cutting them without damage. Cutters are made from special hard steel alloy that ensures their longevity. Anti-slip grips for a sure grip and full control of the cutting force.

Single blade cutters are most suitable for removing parts that have injection channel at the edge - they allow trimming it without chipping part of the detail.

These nippers are for cutting plastic near the details only! Cutting thick plastic or other materials like brass, wires etc will result in damage to the blades!

.

Cążki to podstawowe narzędzie w modelarstwie. Za ich pomocą odcinamy elementy z plastikowych ramek.

Od kształtu ostrza zależy precyzja, z jaką cążki będą cięły. Tańsze modele mogą zostawiać poszarpany ślad na plastiku, droższe, precyzyjniejsze modele pozwalają bez wysiłku odcinać nawet najdrobniejsze detale. Standardem są cąłki o dwóch ostrzach, które sprawdzą się w każdej sytuacji. Są także cążki z jednym ostrzem, które działają jak gilotyna - ostrze przecina plasik opierający się na drugiej, tępej części cążek. Ten sposób cięcia najlepiej sprawdza się, jeśli kanał wlewowy znajduje się na krawędzi elementu. Podczas wycinania części z ramek należy pamiętać, żeby najpierw odciąć element nieco dalej niż wypada styk z ramką. Dzięki temu unikniemy deformacji elementu. Kiedy już mamy taki element poza ramką - możemy usunąć resztę ramki i finalnie obrobić element.

Mr.Hobby jest japońskim producentem najwyższej jakości farb i chemii modelarskiej.

Firma ma w swojej ofercie m.in. wodne farby akrylowe na bazie alkoholu z serii H oraz farby akrylowe z serii C, oparte na rozpuszczalnikach organicznych o niezrównanej jakości i trwałości powłoki. Paleta kolorów została opracowana pod kątem dowolnej gałęzi modelarstwa, tak więc zarówno modelarze lotniczy, pancerni jak i samochodowi bez trudu znajdą odpowiednie dla siebie kolory. Mr.Hobby to także narzędzia modelarskie, lakiery, kleje oraz podkłady - zarówno w sprayu jak i do nakładania aerografem zawsze charakteryzują się najwyższą jakością i dają oczekiwany efekt.

.

Availability: available at wholesaler

Dispatched within: 1-2 days

Price:

€81.88

pcs

Ammo Mig 7613 - Dioramas Brushes Set

Availability: out of stock

Price:

€11.40

Mineshima F-20 - Tweezers for holding beads

Stainles steel tweezers with a slightly curved tip. The tip features a recess for gripping beads or small balls. Ensures a steady and sure grip that won't allow the bead to slip. Works with 2- 6mm diameter beads. Total length: 150mm

Availability: out of stock

Price:

€4.74

Mineshima H-13 - Set of 3 fine files in different shapes.

Set of three metal files in diffeent shapes. Very useful for cleaning up plastic parts of a model kit. Fine grit - perfect for cleaning up small details or final sanding of an element's surface. Set includes flat, half round and round shaped file. File length: 140mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€4.98

pcs

Mineshima F-130A - Precision tweezers - straight tip

Straight stainless steel tweezers. Tapered, precisely machined sharp tip allows for steady grip and manipulation of very small elements. Total length: 170mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€9.74

pcs

Mineshima H-14 - Set of 5 fine files in different shapes.

Set of five metal files in diffeent shapes. Very useful for cleaning up plastic parts of a model kit. Fine grit - perfect for cleaning up small details or final sanding of an element's surface. Set includes flat, square, triangular, round and half round file. File length: 140mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€6.88

pcs

Mineshima F-2 - Straight tweezers with serrated tip

Stainless steel straight tweezers. Serrated tip edges improves the grip and prevents part from slipping away. Total length: 125mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€2.12

pcs

Mineshima H-16 - Set of 5 medium files in different shapes.

Set of five metal files in diffeent shapes. Very useful for cleaning up plastic parts of a model kit. Medium grit - quickly and efficiently removes more material from sanded part which allows for a precise and fast shaping of part's surface. Set includes flat, square, triangular, round and half round file. File length: 140mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€6.88

pcs

Mineshima F-108 - Premium precision tweezers with curved tip

Very precise, stainless steel tweezers. Specially machined very thin and sharp tip ensures stable grip on even the smallest parts and details. Total length: 120mm

Availability: out of stock

Price:

€8.31

Mineshima I-11 - Precise, fine metal file - flat

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width: 2,5mm, thickness: 1,1mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€13.31

pcs

Mineshima I-12 - Precise, fine metal file - round

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, diameter: 2mm, at tip 0,7mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€13.31

pcs

Mineshima I-13 - Precise, fine metal file - square, tapered

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width: 2mm, at tip 1,0mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€13.79

pcs

Mineshima I-14 - Precise, fine metal file - triangular

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width 2,7mm, at tip 1,1mm.

Availability: 1 pc

Dispatched within: 24 hours

Price:

€14.74

pcs

Mineshima I-15 - Precise, fine metal file - half round

Precise metal file with a small grit. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 150mm, width: 3,1mm, at tip 1,1mm, thickness 1,5mm.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€13.79

pcs

Mineshima F-101 - Anodized precision tweezers - straight tip

High quality steel tweezers. Black, anodized surface prevents rusting. Precise and sharp point ensures even small parts are securely gripped. Total length: 125mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€3.55

pcs

Mineshima GY-3 - Ultra precise round file - fine grit

Ultra precise round file for plastic and metal with a diameter of only 0,6mm!m! Perfect for cleaning up those tiny spaces and filigree details of your model kit! Bare handle provides full control over the file while working. 128 notches for each 25mm of file length ensures smooth surface after filing. Total file length: 140mm, working part length: 40mm.

Availability: out of stock

Price:

€21.40

Mineshima F-102 - Anodized precision tweezers - curved tip

High quality steel tweezers. Black, anodized surface prevents rusting. Precise and sharp point ensures even small parts are securely gripped and curved shapes allows reaching into smaller spaces. Total length: 125mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

€3.55

pcs

Mineshima GY-4 - Ultra precise round file - medium grit

Ultra precise round file for plastic and metal with a diameter of only 0,6mm!m! Perfect for cleaning up those tiny spaces and filigree details of your model kit! Bare handle provides full control over the file while working. 70 notches for each 25mm of file's length ensures quick removal of excess material and shapng of the surface. Total file length: 140mm, working part length: 40mm.

Availability: out of stock

Price:

€20.21

Vendor

Dispatched within

Price

New

On sale

Sign up for our latest news and special offers

Mr.Hobby MT107 - Mr.Ultra Single Blade Nipper

Cążki to podstawowe narzędzie w modelarstwie. Za ich pomocą odcinamy elementy z plastikowych ramek.

Mr.Hobby jest japońskim producentem najwyższej jakości farb i chemii modelarskiej.

Ammo Mig 7613 - Dioramas Brushes Set

Mineshima F-20 - Tweezers for holding beads

Mineshima H-13 - Set of 3 fine files in different shapes.

Mineshima F-130A - Precision tweezers - straight tip

Mineshima H-14 - Set of 5 fine files in different shapes.

Mineshima F-2 - Straight tweezers with serrated tip

Mineshima H-16 - Set of 5 medium files in different shapes.

Mineshima F-108 - Premium precision tweezers with curved tip

Mineshima I-11 - Precise, fine metal file - flat

Mineshima I-12 - Precise, fine metal file - round

Mineshima I-13 - Precise, fine metal file - square, tapered

Mineshima I-14 - Precise, fine metal file - triangular

Mineshima I-15 - Precise, fine metal file - half round

Mineshima F-101 - Anodized precision tweezers - straight tip

Mineshima GY-3 - Ultra precise round file - fine grit

Mineshima F-102 - Anodized precision tweezers - curved tip

Mineshima GY-4 - Ultra precise round file - medium grit