Tools

HARDER & STEENBECK 121233 - Evolution CRplus 2024 2in1 airbrush

Airbrush made by Harder & Steenbeck Germany - model Evolution CRplus 2024 2in1

Airbrush comes in a sturdy and elegant, closed plastic box with cardboard cover

nozzle size: 0,28 mm
additionally includes 0,4 mm nozzle set (nozzle, needle and a proper air cap)
paint cup capacity: 2ml & 5ml
air supply connection size: 1/8 inch
includes H&S quick coupler endpiece
catalogue number: 121233

Availability: out of stock

Price:

999,90 zł

HARDER & STEENBECK 121231 - Evolution CRplus 2024 Solo airbrush

Airbrush made by Harder & Steenbeck Germany - model Evolution CRplus 2024 Solo

Airbrush comes in a sturdy and elegant, closed plastic box with cardboard cover

nozzle size: 0,28 mm
paint cup capacity: 2 ml
air supply connection size: 1/8 inch
includes H&S quick coupler endpiece
catalogue number: 121231

Availability: out of stock

Price:

749,90 zł

Mineshima RN-01 - Nokoru precision nippers for plastic

Precise nippers for plastic with a specially designed blade that leaves a small amount of sprue gate on the part. Remaining stub is small enough to be easily sanded down. This design ensures, that even we put the nipper blades flush with the part there is no risk of accidental damage. Double blade design for cutting plastic parts. Soft spring reduces hand fatigue during longer working periods and nice to touch, anti-slip elastomer handles improves use comfort. Sharp, thin blades allow reaching even smallest parts to cut them out of the sprue.

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

34,90 zł

pcs

Mineshima I-10 - Metal file - half round

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 8,2mm, at tip 3mm, thickness: 2,8mm

Availability: out of stock

Price:

56,90 zł

Mineshima I-35 - Precise, fine metal file - flat

#ADR!

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima I-36 - Precise, fine metal file - round

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 5,4mm, thickness: 1,3mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima I-37 - Precise, fine metal file - square, tapered

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 2,4mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima I-38 - Precise, fine metal file - triangular

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 3,5mm

Availability: out of stock

Price:

7,90 zł

Mineshima I-38 - Precise, fine metal file - half round

Precise metal file with a medium grit. Ideal for cleaning up parts in places they were cut off the sprue. Relatively short working part allows very thorough sanding with a full control which is especially important while working on small details. File length: 140mm, width: 5,3mm, at tip 1mm, thickness: 1,6mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

8,90 zł

pcs

Mineshima H-1 - Flat metal file for plastic

Small, metal flat file for working with plastic parts. Very good for quick cleaning of parts and smoothing areas where they were cut off the sprue. Attention! Use only for plastic parts! File is not suitable for use on other material! File length: 130mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

10,90 zł

pcs

Mineshima H-2 - Half round metal file for plastic

Small, metal flat file for working with plastic parts. Very good for quick cleaning of parts and smoothing areas where they were cut off the sprue. Attention! Use only for plastic parts! File is not suitable for use on other material! File length: 130mm

Availability: 1 pc

Dispatched within: 24 hours

Price:

12,90 zł

pcs

Mineshima F-90 - Super precision tweezers - straight tip

Compact super precise tweezers with a sharp, straight tip made from stainless steel. Allows for sure gripping of the smallest and thinnest parts and slightly serrated edges improve grip even further. Special holes in the handle give additional grip for fingers. Total length: 90mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

69,90 zł

pcs

Mineshima F-91 - Super precision tweezers - straight tip with claw

Compact super precise tweezers with a sharp, straight tip ending with a small claw, made from stainless steel. Allows for sure gripping of the smallest and thinnest parts. Specially profilled claw at the end of the tip prevents skewering of the tweezers and stabilizes small parts from slipping from it. It can also be helpful in making various riggings on model kits - a threat or monofilament will not slip out of the tweezers' tips. Special holes in the handle give additional grip for fingers. Total length: 90mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

68,90 zł

pcs

Mineshima I-6 - Metal file - flat

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 6,8mm, thickness: 2,7mm

Availability: available on request

Dispatched within: about 2-3 weeks

Price:

49,90 zł

pcs

Mineshima I-7 - Metal file - round

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, diameter 3,25mm, at tip 1,5mm

Availability: 1 pc

Dispatched within: 24 hours

Price:

49,90 zł

pcs

Mineshima I-8 - Metal file - square tapered

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 3,2mm, at tip 1,7mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

49,90 zł

pcs

Mineshima I-9 - Metal file - triangular

Metal file with a medium grit. Perfect for quick sanding of larger surfaces and parts of plastic model kits. File length: 185mm, width: 6,2mm, at tip: 3,4mm

Availability: 2 pcs

Dispatched within: 24 hours

Price:

55,90 zł

pcs

Mr.Hobby MT107 - Mr.Ultra Single Blade Nipper

Highest quality single bladed cutters for removing plastic parts from sprues. Made by Japanese master craftsman. Super precise single bladed nippers for removing even the smallest parts from sprues without risk of damaging them.

High quality single blade cutters for removing model parts from sprue.

Precisely machined thin and narrow blade allows easy reach to even the smallest parts and cutting them without damage. Cutters are made from special hard steel alloy that ensures their longevity. Anti-slip grips for a sure grip and full control of the cutting force.

Single blade cutters are most suitable for removing parts that have injection channel at the edge - they allow trimming it without chipping part of the detail.

These nippers are for cutting plastic near the details only! Cutting thick plastic or other materials like brass, wires etc will result in damage to the blades!

.

Cążki to podstawowe narzędzie w modelarstwie. Za ich pomocą odcinamy elementy z plastikowych ramek.

Od kształtu ostrza zależy precyzja, z jaką cążki będą cięły. Tańsze modele mogą zostawiać poszarpany ślad na plastiku, droższe, precyzyjniejsze modele pozwalają bez wysiłku odcinać nawet najdrobniejsze detale. Standardem są cąłki o dwóch ostrzach, które sprawdzą się w każdej sytuacji. Są także cążki z jednym ostrzem, które działają jak gilotyna - ostrze przecina plasik opierający się na drugiej, tępej części cążek. Ten sposób cięcia najlepiej sprawdza się, jeśli kanał wlewowy znajduje się na krawędzi elementu. Podczas wycinania części z ramek należy pamiętać, żeby najpierw odciąć element nieco dalej niż wypada styk z ramką. Dzięki temu unikniemy deformacji elementu. Kiedy już mamy taki element poza ramką - możemy usunąć resztę ramki i finalnie obrobić element.

Mr.Hobby jest japońskim producentem najwyższej jakości farb i chemii modelarskiej.

Firma ma w swojej ofercie m.in. wodne farby akrylowe na bazie alkoholu z serii H oraz farby akrylowe z serii C, oparte na rozpuszczalnikach organicznych o niezrównanej jakości i trwałości powłoki. Paleta kolorów została opracowana pod kątem dowolnej gałęzi modelarstwa, tak więc zarówno modelarze lotniczy, pancerni jak i samochodowi bez trudu znajdą odpowiednie dla siebie kolory. Mr.Hobby to także narzędzia modelarskie, lakiery, kleje oraz podkłady - zarówno w sprayu jak i do nakładania aerografem zawsze charakteryzują się najwyższą jakością i dają oczekiwany efekt.

.

Availability: available at wholesaler

Dispatched within: 1-2 days

Price:

343,90 zł

pcs

Vendor

Dispatched within

Price

New

On sale

Sign up for our latest news and special offers

HARDER & STEENBECK 121233 - Evolution CRplus 2024 2in1 airbrush

HARDER & STEENBECK 121231 - Evolution CRplus 2024 Solo airbrush

Mineshima RN-01 - Nokoru precision nippers for plastic

Mineshima I-10 - Metal file - half round

Mineshima I-35 - Precise, fine metal file - flat

Mineshima I-36 - Precise, fine metal file - round

Mineshima I-37 - Precise, fine metal file - square, tapered

Mineshima I-38 - Precise, fine metal file - triangular

Mineshima I-38 - Precise, fine metal file - half round

Mineshima H-1 - Flat metal file for plastic

Mineshima H-2 - Half round metal file for plastic

Mineshima F-90 - Super precision tweezers - straight tip

Mineshima F-91 - Super precision tweezers - straight tip with claw

Mineshima I-6 - Metal file - flat

Mineshima I-7 - Metal file - round

Mineshima I-8 - Metal file - square tapered

Mineshima I-9 - Metal file - triangular

Mr.Hobby MT107 - Mr.Ultra Single Blade Nipper

Cążki to podstawowe narzędzie w modelarstwie. Za ich pomocą odcinamy elementy z plastikowych ramek.

Mr.Hobby jest japońskim producentem najwyższej jakości farb i chemii modelarskiej.