IBG

Pre-order item! Your order will be fulfilled once the manufacturer releases the model. Estimated availability: second half of May. The delivery date is approximate and may change for reasons beyond our control.

Resin model kit by IBG featuring the Supermarine Type 300 Spitfire prototype K5054 during flight testing in 1:72 scale. Fully 3D printed kit – available for preorder.

• Scale: 1:72
• Aircraft type: fighter
• Engine type: propeller
• 3D printed resin kit

A great choice for aviation enthusiasts and collectors of prototype aircraft.

Pre-order item! Your order will be fulfilled once the manufacturer releases the model. Estimated availability: second half of May. The delivery date is approximate and may change for reasons beyond our control.

Figure set by IBG featuring a Polish pilot and ground crew from 1939 in 1:72 scale. The kit is made using 3D printed resin technology.

• Scale: 1:72
• Era: World War II (1939)
• Type: figure set
• 3D printed resin parts

Perfect addition for aviation dioramas from the September Campaign.

Pre-order item! Your order will be fulfilled after the manufacturer releases the model. Estimated availability: second half of May. The delivery date is approximate and may change for reasons beyond our control.

Plastic model kit by IBG featuring the KTO Rosomak armored personnel carrier “The Green Devil” in 1:72 scale. The kit allows building a detailed miniature of a modern Polish military vehicle.

• Scale: 1:72
• Era: modern
• Vehicle type: armored personnel carrier
• Drive system: wheeled

A great choice for modelers interested in modern military vehicles and dioramas.

Pre-order item! Your order will be fulfilled once the manufacturer releases the model. Estimated availability: second half of May. The delivery date is approximate and may change for reasons beyond our control.

Plastic model kit by IBG featuring the KTO Rosomak Medevac armored personnel carrier in 1:72 scale. The kit allows building a miniature replica of a modern battlefield medical evacuation vehicle.

• Scale: 1:72
• Era: modern
• Vehicle type: armored personnel carrier
• Drive system: wheeled

A great choice for modern military and medical diorama scenes.

Pre-order item! Your order will be fulfilled once the manufacturer releases the model. Estimated availability: second half of May. The delivery date is approximate and may change for reasons beyond our control.

Plastic model kit by IBG featuring the FV4101 Charioteer tank in Middle East service in 1:72 scale. The kit allows building a detailed miniature of a post-war British armored vehicle.

• Scale: 1:72
• Era: Cold War
• Vehicle type: tank
• Drive system: tracked

A great choice for modelers interested in British vehicles and Middle Eastern conflicts.

Pre-order item! Your order will be fulfilled once the manufacturer releases the model. Estimated availability: second half of May. The delivery date is approximate and may change for reasons beyond our control.

Plastic model kit by IBG featuring the British Bedford MWD General Service truck with closed cab in 1:72 scale. The kit allows building a detailed miniature of a WWII military transport vehicle.

• Scale: 1:72
• Era: World War II
• Vehicle type: military truck
• Drive system: wheeled

A great choice for WWII logistics and support dioramas.

Pre-order item! Your order will be fulfilled once the manufacturer releases the model. Estimated availability: second half of May. The delivery date is approximate and may change for reasons beyond our control.

Resin model kit by IBG featuring the Supermarine Type 300 Spitfire prototype K5054 from its first flight, including a test pilot figure, in 1:72 scale. The kit is fully 3D printed.

• Scale: 1:72
• Aircraft type: fighter
• Engine type: propeller
• 3D printed resin kit

A perfect choice for aviation enthusiasts and prototype aircraft collectors.

The IBG Models 2026 catalogue presents the current product range and upcoming releases of the manufacturer. The publication includes an overview of plastic model kits, modelling accessories and additional products offered by IBG.

• Manufacturer: IBG
• Year of publication: 2026
• Type: product catalogue
• Overview of IBG plastic model kits
• Information about new releases
• Publication for modellers and collectors

3D printed exhaust set for Supermarine Spitfire aircraft models in 1:72 scale by IBG Models. The set represents the Fishtail type exhausts with additional gun heating pipes, reproduced with high detail using modern 3D printing technology.

• Scale: 1:72
• Manufacturer: IBG Models
• 3D printed parts
• Fishtail type exhausts with gun heating pipes

An accessory designed to improve the level of detail of 1:72 scale Supermarine Spitfire models.

3D printed exhaust set for Supermarine Spitfire aircraft models in 1:72 scale by IBG Models. The parts represent the Individual type exhausts with separate pipes for each cylinder, reproduced with high detail using modern 3D printing technology.

• Scale: 1:72
• Manufacturer: IBG Models
• 3D printed parts
• Individual type exhausts for Spitfire

An accessory designed to improve the level of detail of 1:72 scale Supermarine Spitfire models.

3D printed wheel set for Supermarine Spitfire aircraft models in 1:72 scale by IBG Models. The set features wheels with IJ13 type tyres and hub covers, reproduced with a high level of detail thanks to modern 3D printing technology.

• Scale: 1:72
• Manufacturer: IBG Models
• 3D printed parts
• IJ13 type tyres with hub covers

An accessory designed to enhance the level of detail of 1:72 scale Supermarine Spitfire models.

Plastic model kit of the British Bedford MW truck in 1:72 scale by IBG Models, representing a captured vehicle used in German service. The Bedford MW was a light military truck widely used by the British Army during World War II. Some captured vehicles were later employed by German forces for transport and support roles.

• Scale: 1:72
• Manufacturer: IBG Models
• Plastic model kit
• Captured British truck in German service

The kit allows modelers to build a miniature of a captured Allied vehicle used by the Wehrmacht during WWII.

Plastic model kit of the German Focke-Wulf Fw 190D-9 fighter aircraft in 1:72 scale by IBG Models. The “Dora” version was one of the most advanced variants of the Fw 190 used by the Luftwaffe during the final stage of World War II. This kit represents aircraft from Jagdgeschwader 301, a unit involved in defending German airspace against Allied bombing raids.

• Scale: 1:72
• Manufacturer: IBG Models
• Plastic model kit
• WWII German fighter aircraft

The kit allows modelers to build a miniature of one of the most famous late-war Luftwaffe fighters.

Weapons and equipment set for Polish cavalry (Uhlans) figures from the 1939 campaign in 1:35 scale by IBG Models. The set is designed as an accessory for figure kits and contains weapons and equipment typical of Polish Army cavalry soldiers at the beginning of World War II.

• Scale: 1:35
• Manufacturer: IBG Models
• Weapons and equipment accessory set
• For Polish cavalry figures from 1939

An accessory set that allows modelers to enhance figures and dioramas depicting Polish cavalry units during the September Campaign of 1939.

Plastic model kit of the Supermarine Spitfire Mk Vb fighter aircraft in 1:72 scale by IBG Models. This kit represents an early configuration used between 1941 and 1943 with the early windscreen featuring an external bulletproof panel. The model belongs to the IBG “80…” series and includes plastic parts and photo-etched details.

• Scale: 1:72
• Manufacturer: IBG Models
• Plastic parts and photo-etched elements
• Part of the IBG “80…” series (no decals included)

The kit does not include decals or printed instructions – the assembly manual can be downloaded for free from the manufacturer’s website.

Plastic model kit of the Supermarine Spitfire Mk Vb fighter aircraft in 1:72 scale by IBG Models. This version represents aircraft from 1941–1943 equipped with the later windscreen featuring an integrated bulletproof panel. The kit belongs to the IBG “80…” series and includes plastic parts and photo-etched details.

• Scale: 1:72
• Manufacturer: IBG Models
• Plastic parts and photo-etched elements
• Part of the IBG “80…” series (no decals included)

The kit does not include decals or printed instructions – the assembly manual can be downloaded for free from the manufacturer’s website.

Painting mask set for the PZL M18 Dromader aircraft model in 1:48 scale by IBG Models. The masks help to precisely cover transparent parts and other areas during painting.

• Scale: 1:48
• Manufacturer: IBG Models
• Painting masks for PZL M18 Dromader
• Helps achieve clean and precise paint lines

A modelling accessory designed for 1:48 scale PZL M18 Dromader kits.

3D printed engine and exhaust set for PZL M18 Dromader aircraft models in 1:48 scale by IBG Models. The parts accurately reproduce the aircraft engine and its characteristic exhaust system.

• Scale: 1:48
• Manufacturer: IBG Models
• 3D printed parts
• Engine and exhaust system for PZL M18 Dromader

An accessory designed to enhance the level of detail of 1:48 scale PZL M18 Dromader models.