Trumpeter 08027 - Angle modeling rivets with handle

A tool for making imitation rivets on models in any scale.

The set includes angle riveting irons with blades for engraving rivets on plastic models. The shape of the riveting anvil makes it easier to rivet in hard-to-reach places and in corners, such as the fuselage. This is a complementary set to the basic wheel-shaped riveting anvils. Tooth spacing: 0.4, 0.5, 0.6, 0.8, 1.0, 1.25 and 1.5 mm.

-

The set consists of seven angle riveters with blades for engraving rivets on plastic models. They are extremely easy to use. The wheels should be mounted in the holder which is included in the set. Gently guide the wheel over the plastic or resin, applying pressure to create marks and engrave recessed rivets. To create even rows of rivets, it is best to use a special marking tape previously glued on the model, a ruler as a guide or you can do it slowly by hand. The rivet guns are packaged in a small plastic box. A wrench for tightening the wheel is included.

Trumpeter is one of China's largest manufacturers of scale models.

They have a wide range of model vehicles in 1/35 scale, aircraft in 1/48 and 1/72 scale, and ships in 1/350 and 1/700 scales. Trumpeter also produces a wide range of modeling tools and accessories at affordable prices and good quality. Trumpeter models are among the moderately difficult to build - the fit of the parts is good and the amount of detail is adequate for many modelers. Noteworthy is probably the largest selection of models of Soviet armored equipment (modern as well as historical) and the release of models of lesser-known machines.