Eduard JX005 - 1:32 Fw 190D masks

Eduard JX005 mask set – canopy painting masks for the Fw 190D model (Hasegawa) in 1:32 scale

Eduard JX005 is a set of self-adhesive 1:32 masks for painting the canopy framing and other glazing, and the wheel hubs, tailored to the Fw 190D model from Hasegawa. The masks are die-cut from yellow Kabuki masking paper, giving sharp edges without hand masking with tape. The base kit is not included.

What's in the box:

• Sheet of self-adhesive masks made of yellow Kabuki masking paper, die-cut for the canopy and other glazing and for the wheel hubs
• Mask placement instructions

Set specifications:

• Scale: 1:32
• Catalogue number: JX005
• Manufacturer: Eduard
• Dedicated kit: Fw 190D from Hasegawa
• Accessory type: canopy painting masks
• Material: yellow Kabuki masking paper, machine-cut

Self-adhesive painting masks – crisp canopy frame edges

Eduard masks are self-adhesive stencils die-cut from low-tack yellow Kabuki masking paper suited to delicate model surfaces. They cover the clear areas of the glazing and leave only the canopy framing exposed, so that after airbrushing you get sharp, even frame edges – hard to achieve when masking by hand with tape.

The recommended method is to apply the masks to clean, degreased glazing, press the edges down firmly and then airbrush the paint. Once the paint has dried, the masks are removed. The masks are intended for single use and should not be left on the model for a long time.

About the aircraft – Focke-Wulf Fw 190D:

The Focke-Wulf Fw 190D, commonly called the Dora, was a high-altitude version of the Fw 190 fighter. In place of the BMW 801 radial it used a liquid-cooled Junkers Jumo 213 inline engine with a distinctive annular radiator at the front, which made the nose look radial-engined. The fuselage was lengthened with a plug ahead of the tail fin to keep the balance.

The Fw 190D-9 entered service in the autumn of 1944 and offered better performance at higher altitudes than earlier A versions. It was used against bombers, in fighter combat and to cover Me 262 jets during take-off and landing. The Dora bridged the classic Fw 190 and the further-developed Ta 152. About 700 examples were built.

Original specifications (Focke-Wulf Fw 190D):

• Length: 10.20 m
• Wingspan: 10.51 m
• Height: 3.36 m
• Take-off weight: approx. 4300 kg
• Crew: 1
• Powerplant: Junkers Jumo 213A inline, approx. 1750 hp (over 2000 hp with MW 50)
• Max speed: approx. 685 km/h
• Ceiling: approx. 12,000 m
• Range: approx. 840 km
• Armament: 2 x 13 mm machine guns and 2 x 20 mm cannon
• Production: approx. 700 D built, from 1944

About the manufacturer – Eduard:

Eduard is a Czech manufacturer of scale model kits and modelling accessories, established in 1989 and based in Obrnice. The company is widely recognised among aircraft modellers for its own 1:48 and 1:72 kits and for an extensive range of upgrade accessories: photo-etched parts, Brassin resin components, decals and painting masks. Eduard masks are die-cut from yellow Kabuki masking paper and designed for specific plastic kits, ensuring an accurate fit to the shape of the canopy and other details. The EX mask series covers hundreds of items dedicated both to Eduard kits and to kits from other manufacturers.