HARDER & STEENBECK 123750 - 0,6 mm needle for H&S airbrushes

Needle 0,6 mm for use in Harder & Steenbeck airbrushes.

• manufacturer's catalogue number - 123750
• needle size - 0,6 mm
• Compatible with Ultra, Evolution, Infinity and Grafo airbrushes

If the needle in airbrush is bent it has to be replaced. Bent needle causes irregular paint streaming, paint spitting and clogging. Needle is removed by pulling it backwards after loosening the needle locking nut. To reinstall the needle, the safest way is to remove the air cap and nozzle and insert the needle blunt side first through the airbrush front. Push the needle untill the pointed tip is barely visible in the airbrush then reinstall nozzle and air cap. Finally press the needle forward into the nozzle untill you fill the slightest resistsance and secure the needle locking nut.

Choosing correct size of nozzle, needle and air cap is very important.All those parts have to be the same size for the airbrush to work correctly. Mixing those parts might result in damage e.g. to the nozzle by putting inside too large needle. Harder & Steenbeck nozzle size is denoted by the number of lines cut onto the nozzle. 0,6 mm nozzle has six thin lines. End of corresponding needle features six beads machined on it

Harder & Steenbeck airbrushes accessories and spare parts:

Each airbrush needs replacing parts that are subject to wear. Usually seals needs regular replacement and often needle and nozzle gets damaged. Harder & Steenbeck offer all essential spare parts in their offer. All those products can be found in our shop.

See our range of German made Harder & Steenbeck airbrushes:

H&S offer a wide range of airbrushes. Most popular are Ultra, Evolution and Infinity models. They are sold in many sub variants that differ in appearance, included accessories and functionality:

Evolution airbrushes- are available as: Evolution Silverline, Evolution ALplus with a body made out of aluminum and a CRplus with a 0,2 nozzle and a 2in1 pack

Ultra airbrush – offers very good quality at a reasonable price - available variants are Ultra 2in1 and Solo

Infinity airbrushes - are available as basic models or CRplus with a triple, chrome finished plating,

Other models available in our offer are Grafo and Colani.

Full range of Harder & Steenbeck airbrushes.

Our company is an official Harder & Steenbeck distributor.

We try to have all the available spare parts ready in our warehouse. We also can get any item or product from the manufacturer's offer.

What is an airbrush used for?

Airbrush is a miniature pistol for precise painting. It sprays the paint using a stream of compressed air. As such an airbrush will not work on its own - it needs a source of compressed air. Usually it's done by an air compressor that either gives the air straight to the airbrush or to the air tank connected to it. Airbrush can also be connected to a compressed air can but it's a less comfortable solution that doesn't give proper results and in the longer run is much more expensive hence not recommended. Airbrush is a fantastic tool for painting model kits, graphic, artistic and other hobby works and even decorating confectionery!

Harder and Steenbeck (from the founders' names August Harder and Wilhelm Steenbeck) is a renowned German manufacturer of airbrushes and airbrush accessories.

They have existed for almost 100 years now and started as a manufacturer of small electronic components for radio receivers then produced some school aid equipment and small mechanical elements for cars. In the 1950's they began manufacturing their first airbrushes mainly for professional industrial use. In the middle of 1990's they entered the consumer market with Grafo and Colani airbrush models. They really gained their reputation and wide acclaim at the end of that decade with the introduction of the Evolution model followed a few years later by Ultra and Infinity models. Apart from the highest quality and precision using only the best materials in airbrush production, the main feature of all H&S airbrushes is a universal nozzle mount among all of their models. H&S airbrushes are also made with modularity in mind, which means that by using various available accessories you are able to tailor them exactly for your needs.