Eduard JX077 - 1:32 P-51B masks

Eduard JX077 mask set – canopy painting masks for the P-51B Mustang model (Trumpeter) in 1:32 scale

Eduard JX077 is a set of self-adhesive 1:32 masks for painting the canopy framing and other glazing, and the wheel hubs, tailored to the P-51B Mustang model from Trumpeter. The masks are die-cut from yellow Kabuki masking paper, giving sharp edges without hand masking with tape. The base kit is not included.

What's in the box:

• Sheet of self-adhesive masks made of yellow Kabuki masking paper, die-cut for the canopy and other glazing and for the wheel hubs
• Mask placement instructions

Set specifications:

• Scale: 1:32
• Catalogue number: JX077
• Manufacturer: Eduard
• Dedicated kit: P-51B Mustang from Trumpeter
• Accessory type: canopy painting masks
• Material: yellow Kabuki masking paper, machine-cut

Self-adhesive painting masks – crisp canopy frame edges

Eduard masks are self-adhesive stencils die-cut from low-tack yellow Kabuki masking paper suited to delicate model surfaces. They cover the clear areas of the glazing and leave only the canopy framing exposed, so that after airbrushing you get sharp, even frame edges – hard to achieve when masking by hand with tape.

The recommended method is to apply the masks to clean, degreased glazing, press the edges down firmly and then airbrush the paint. Once the paint has dried, the masks are removed. The masks are intended for single use and should not be left on the model for a long time.

About the aircraft – North American P-51B/C Mustang:

The P-51B/C Mustang was a variant of the American fighter created after fitting a Rolls-Royce Merlin inline engine built under license by Packard. The change of powerplant radically improved high-altitude performance compared with the earlier Allison-engined version. The B and C differed mainly in place of manufacture: the B was built at Inglewood and the C at Dallas; both retained the razorback canopy.

Thanks to the combination of the Merlin engine, aerodynamic wing and large fuel capacity, the B/C Mustang could accompany bombers on long escort flights over enemy territory. A limitation was the poorer rearward visibility caused by the razorback canopy, which led to the bubble canopy of the later D version. The B/C variants were built in several thousand examples.

Original specifications (North American P-51B/C Mustang):

• Length: 9.83 m
• Wingspan: 11.28 m
• Height: 3.71 m
• Takeoff weight: approx. 4,300 kg
• Crew: 1
• Powerplant: 1 Packard V-1650 Merlin inline engine, approx. 1,400 hp
• Max speed: approx. 700 km/h
• Ceiling: approx. 12,700 m
• Range: approx. 1,900 km (with drop tanks)
• Armament: 4 x 12.7 mm machine guns, bombs or underwing fuel tanks
• Production: 1943-1944, several thousand built

About the manufacturer – Eduard:

Eduard is a Czech manufacturer of scale model kits and modelling accessories, established in 1989 and based in Obrnice. The company is widely recognised among aircraft modellers for its own 1:48 and 1:72 kits and for an extensive range of upgrade accessories: photo-etched parts, Brassin resin components, decals and painting masks. Eduard masks are die-cut from yellow Kabuki masking paper and designed for specific plastic kits, ensuring an accurate fit to the shape of the canopy and other details. The EX mask series covers hundreds of items dedicated both to Eduard kits and to kits from other manufacturers.